Why do I have brake lights but no running lights on trailer?
Working Running Lights, But No Turn Signals or Brake Lights On Trailer You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly.
Why are the running lights on my trailer not working?
If there is no power on the running light pin then there is a break or loose connection somewhere between the connector and where it terminates at the front of the vehicle that you will need to track down. If everything checks out on the vehicle then the issue is on the trailer.
Can a brake light work with a running light on?
Turn signals and brake lights work, running lights don’t. But brake lights don’t work with the running lights turned on. 77448 @GarryR You’ll need to check the wires on the vehicle side and trailer side and look for any pinch points or corrosion.
Why are the brake lights not working but the tail lights are?
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
Why is my tow package running light not working?
If it is the tow package running light fuse that is blowing then there is most likely a short in the trailer wiring or in the trailer or vehicle side connector. What you will want to do first is make sure both the vehicle side and trailer side connectors are clean and free of corrosion inside and out.
Why are the brake lights on my trailer not working?
Running jumper wires from the light grounds to the main trailer connector ground can help. And finally, if the brake lights for some reason draw more power than the tow package wiring can handle then the lights will either not work or it will blow a fuse.
Are there any running lights on my trailer?
I have brake lights and turn signals but cannot get the running lights to work. The 4-way on your trailer is what’s known as a wishbone connector like part # A35W42B. Two of the wires are the running light circuit which is a little easier to install since you can run one down each side of the trailer.
Why does my trailer light keep blowing fuses?
That is most likely why your fuse is popping. The main ground strap from your trailer frame to your trailer connector needs to be connected to a clean metal surface. The light assemblies ground to the trailer frame which then goes from there to the ground strap of the trailer connector.
Turn signals and brake lights work, running lights don’t. But brake lights don’t work with the running lights turned on. 77448 @GarryR You’ll need to check the wires on the vehicle side and trailer side and look for any pinch points or corrosion.
