Which is the best type of outdoor awning?
Often referred to as ‘ lapa blinds, lapa curtains, canvas blinds, drop blinds, roller screens, patio blinds, patio screens’ , this product provides quad-functional advantages and is by far the most popular form of awning supplied in our market. We offer a wide range of options to suit every budget. Protects against Cold, wind, sun and rain.
What kind of motor do you need to operate an awning?
The awning is normally controlled with a crank handle turning the barrel through a reduction gear box or in awkward situations can be operated by an electric motor from a fixed position switch or remote control unit.
What is the front rail of an awning made of?
The front rail is a substantial aluminium extrusion with grooves both for the main cover and the valance, and makes for easy assembly and exchange of fabric and valance. This unit is for sun protection only, and is to be fully retracted when not in use.
How does a retractable awning on a patio work?
The retractable patio awning comprising material to your selection from our range is mounted onto a galvanised fluted steel roller tube with roller supports which are then fitted on a 40mm x 40mm square installation tube which is supported by coated cast aluminium face or top fix mounting brackets.
What’s the best way to replace an awning?
The cam lock lever on the right-hand torsion assembly must be turned clockwise to the roll up position, before the spring can be unwound. 1. Make sure the torsion spring has been relieved of its tension (see Section C.) 2. Mark or make note of the location of the fabric and the end cap on the roller tube.
Can You unwind an awning while standing on the ground?
The unwinding can also be done while standing on the ground and the awning fully extended and the opposite side rafter locked in place. The torsion spring will be wound with 8/eight more turns in this position and is extremely dangerous. Severe injuries can result from the rapid spin-off of the top casting.
Can a low eave awning be installed under a roof overhang?
Being able to choose the option of a motor on the right or left side gives you more flexibility on where you can install the awning. Specialized low-eave models are designed for use under a roof overhang or gutter. They’re available as both window and door awnings.
How do you unwind the torsion spring on an awning?
Take the top casting carefully out of the main support arm (see NOTE below). Slowly let the torsion spring unwind completely. Repeat Steps 1 & 2 for the opposite end. NOTE: If the awning’s right-hand torsion assembly has been pinned, the cotter pin must be removed from the torsion assembly before the spring can be unwound.
