What is the outer edge of the collar?
Collar edge: The outer edge or design of the collar. Collar stand: Distance from the back neck up to the rollover line of the collar. Convertible collar: A collar that springs open when unbuttoned.
What is an Undercollar?
The undercollar used in menswear tailoring is cut from a fabric that will allow a sharp crease in the collar. The edges are usually left raw and the undercollar is fastened to the upper collar by a special hand or machine stitch called a fell stitch, another name for hem stitch.
What is the purpose of collar?
Collars are both functional and decorative features sewn to the neckline of a garment. As decoration, the collar is often the focal point of the garment drawing the eye upward to frame the face. As a functional feature, collars often provide warmth and protection from the elements.
What is used to prevent a facing from rolling to the outside of a garment?
Understitching
Understitching solves this problem! Understitching is simply stitching a line close to the edge of a facing to keep it from rolling toward the outside. It comes in especially handy when sewing around a neckline.
What are the classes of stitches?
The 6 classes of stitch are mentioned as:
- Class 100: Single Thread Chainstitch. The stitches formed here are from one or more needle by the method of intralooping.
- Class 200: Hand Stitch.
- Class 300: Lock Stitch.
- Class 500: Over-edge Chain Stitch.
- Class 600: Covering Chain Stitch.
Which is the outer edge of the collar?
The neckline edge is the side of the collar that is stitched to the neckline of the garment. The collar edge the outer edge or design of the collar. Collar stand (band) is the height at which the collar rolls over itself. Roll line is the fold-over at the collar stand.
What are the points of a shirt collar?
Points are the corners of a collar, sometimes buttoned down or left free to hang. Spread is the distance between the points of a shirt collar. The neckline edge is the side of the collar that is stitched to the neckline of the garment.
What are the different types of collars and bands?
The collar edge the outer edge or design of the collar. Collar stand (band) is the height at which the collar rolls over itself. Roll line is the fold-over at the collar stand. Basically, there are 3 collars types based on the position and size of the band.
Are there collars that fall flat on the neck?
These collars fall flat on the dress around the neckline and are plain in their look. There will be no collar stand, hence they fall on to the shoulders. You can play around accessorizing or using a statement neckpiece. Here’s another women shirt dress with a flat collar.
The neckline edge is the side of the collar that is stitched to the neckline of the garment. The collar edge the outer edge or design of the collar. Collar stand (band) is the height at which the collar rolls over itself. Roll line is the fold-over at the collar stand.
Which is more important, the neckline or the collar?
Neckline is a very important part of any garment. One should be very careful while selecting a neckline and also while stitching it. A neckline should not only be comfortable but should also suit to the type of fabric. Neckline can be divided as front bodice neckline and back bodice neckline.
Where does the collar go on a shirt?
In the case of shirt collars, the collar band should sit close to the neck when the button is fastened (even if the garment is to be worn with the neckline open). The collar is sandwiched between the top edges of a standing collar and the inside neckline is finished in the same manner as above.
How to make a separate upper and under collar?
To achieve a separate upper and under collar when the pattern provides only one piece for both, trace a second copy of the collar and mark it “under collar”. Trim a scant 3mm from both ends of the collar. Mark the centre back and measure and mark a point up 6mm* (see Tip below) from neck edge and reshape the neck edge.
