What is the minimum size for scaffold planks

If scaffolds are not fully planked, it can cause injuries not only during erection and dismantling but also during general scaffold use. Regulations require that all scaffold platforms must be at least 460 mm (18 in) wide and all platforms above 2.4 m (8 ft) must be fully decked.

What is the minimum width of a scaffold plank?

1 Minimum width The minimum width of a scaffold plank shall be 220 mm. For timber planks, the minimum width shall be at a moisture content not exceeding 15 percent.

What are the requirements for a scaffold plank?

Topic: Scaffold PlanksIssued by: VP WorkSafe ServicesParagraph: 128(a)Date Revised:

What size are scaffold planks?

The standard size for a new scaffold board is a thickness of 38mm, a width of 225mm, and lengths going up to 3.9m (13ft). As timber goes, scaffold boards are fairly “chunky”, which is what gives them a wonderfully rustic and industrial aesthetic and feel.

What are the minimum dimensions of a number one grade lumber scaffold plank?

Try to plank the entire working level of a scaffold for maximum support and stability. Use a minimum of 48 mm thick Number 1 Grade spruce-pine-fir (SPF) planking or better. Overlap or extend planking 150 mm (6 in.) to 300 mm (12 in.) and cleat at each end to prevent planking from slipping and blowing off.

Do you need a permit to erect scaffolding?

How do I obtain a permit to erect scaffolding? Any scaffold which encroaches or projects over the highway requires a scaffold permit; these permits are only issued to the scaffolding/construction company by the authority where the scaffold is erected.

What is the width of scaffolding?

The scaffolding width is determined by the width of the boards, the minimum width allowed is 600 mm but a more typical four-board scaffold would be 870 mm wide from standard to standard. More heavy-duty scaffolding can require 5, 6 or even up to 8 boards width.

How wide is a 3 board scaffold?

Traditionally they are seasoned wood and come in three thicknesses (38 mm (usual), 50 mm and 63 mm) are a standard width (225 mm).

What size are UK scaffold boards?

With a standard dimension of 225mm wide by 38mm thick, all boards are available in lengths from 1.8m to 3.9m. Grade A and BSI British Standard boards are visually graded (marked VG) or machine graded (marked MG) and marked with the manufacturer’s code for traceability.

How wide is a 5 board scaffold?

InfoDetailLength1.5MWidth225mmThickness36mmWeight7KG

Article first time published on

How wide at minimum must a scaffold deck be?

Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and walkway shall be at least 18 inches (46 cm) wide. … Each end of a platform, unless cleated or otherwise restrained by hooks or equivalent means, shall extend over the centerline of its support at least 6 inches (15 cm).

At what height does a scaffold need to be engineered?

Construction scaffolding safety is paramount. OSHA further states that scaffolds more than 125 feet in height above the base must be designed by a professional registered engineer.

How many inches must the planks extend past their support?

All planking or platforms must be overlapped a minimum of twelve (12) inches and secured from movement. Scaffold planks shall extend over their end support at least six (6) inches but no more than twelve (12) inches.

What two types of planks are most suitable for use as scaffold planks?

1.2.6 Uses of Wood Plank Wood and Engineered wood product planks are used as temporary platforms on supported scaffolds.

What is the most commonly used scaffold plank?

Wood. Planking is critical for safe conditions on a scaffold to properly support workers and their equipment. Wood, such as fir or pine, is the most common material.

What is the maximum distance allowed between planks on a scaffold?

(Emphasis added). The standard requires that the space between the scaffold planks or between scaffold planks and uprights be no more than one inch wide unless the employer can demonstrate that a wider space is necessary. However, the platform must still be planked or decked as fully as possible.

What is the minimum length a scaffold plank must overhang the scaffold transom at each end?

The use of 7-foot spans is ideal when using 16-foot planks as this allows a 1-foot overhang at each end.

How thick the scaffold plank timber should be?

Traditionally, scaffold planks were solid-sawn lumber, often full-thickness 2x10s, as opposed to the 2-inch nominal thickness lumber (actual thick- ness, 11⁄2 inches) used for most construction needs.

How much does a scaffold plank weight?

Weight: 48.0 lbs.

Can I put up scaffolding myself?

Who can put up scaffolding? You must use a builder or scaffolding contractor who is trained and competent to put up scaffolding. This means they need to have the necessary skills, experience and knowledge to manage health and safety.

How much does a scaffolding licence cost?

A licence for: scaffolding is £151 per month. hoarding is £151 per month. a crane is £306 per month.

Can Neighbours put scaffolding on my property?

In a nutshell as long as adequate notice is given, a neighbour can erect scaffolding on your property (and vice versa) as long as permission is given and the repairs are deemed essential.

Can you use scaffold boards for flooring?

A cheaper option for flooring are used scaffold boards, at a fraction of the cost of reclaimed floorboards you get a lot more coverage for your money. With a bit of DIY knowledge, time and money and elbow grease the results are great.

Why do scaffold boards have end bands?

Our scaffolding board end bands are used with scaffold boards to stop the ends of the timber from splitting. These are great to add an industrial effect for shelving or other furniture when cutting down our scaffolding boards or using with our timber boards.

Can you use scaffold boards for decking?

Unless you’re certain they’re treated (and yes, you can buy treated scaffold boards!), in order to use them outside long-term, you will need to treat them. And if you don’t and they’re not treated, well don’t expect them to hold up for nearly as long as decking would.

How wide is a scaffold board in inches?

Length available: 8ft, 10ft, 13ft. Thickness: 38mm (1.50 inches). Width: 225mm (8.86 inches).

What is the minimum length & width of a sole plate?

The width and thickness of a timber sole plate shall be 200mm and 25 mm minimum. In place of timber soleplate, 10 mm thick steel plate or steel channel of size more than 200mm depth (ISMC 200) with flanges facing upward, may also be used as the soleplate. The soleplate area shall not be less than 1000 sq.

What wood is scaffold board?

The reclaimed scaffolding boards we use are made of European Whitewood (sometimes referred to as silver fir or Norway spruce). European Whitewood is is a medium density soft wood which is low in weight. It is sturdy and long lasting and therefore suitable for load baring uses, hence the use as scaffolding boards.

How many boards wide can a scaffold be?

Board Brackets Such brackets may be used within TG 20 compliant independent scaffolding provided that the inner platform at a maximum of one lift is so extended per elevation of scaffolding. The remaining inside platforms should be up to two boards wide unless design advice is obtained.

Are scaffold boards pressure treated?

These are new scaffold boards which are freshly sawn by a machine, they are brown pressure treated to ensure their longevity. The boards are not banded. They are in great condition and can be creatively used.