How To Remove Front Panel Of Maytag Washer

How do I remove the front panel of a Maytag washing machine?

| Find the two screws that secure the bottom of the bezel to the sides of the frame. Remove the screws with a wrench. Rotate the bottom of the bezel towards you and pull down to separate the top of the bezel from the top.

How do you remove the front panel of a washing machine?

Discs How to remove the 1995 front panel from current models

Disconnect the washing machine from the power supply.
Place two spring clips between the top and front panels (about 10cm from the corners).
Place the catch between the top and the faceplate and press to release the clips.
Pull the top of the bezel forward, lift it up, and remove it from the lower mounting tabs.

The question then is: how do you open the top of the washing machine?

Open the lid of the washing machine and put your hand between the drum and the top of the washing machine. Lift the container towards you to remove it. If the cabinet does not lift easily, slide it towards the front of the machine and lift it up.

You may also be wondering how to remove the faceplate on a Maytag Atlantis washing machine?

How to remove the front cover of a Maytag Atlantis

Insert a putty knife between the front and top panels on the left and right to loosen the spring clips.
Lift the top plate and rotate it on the disc.
Remove the two 5/16 inch screws in the bezel.
Tilt the front panel towards you, lift it up and remove it from the device.

How do you open a reliable Maytag washing machine?

A standard Maytag console can be accessed by removing the two internal screws at the top and the console will tilt towards you to reveal the timer, water level control, lid switch, and function switches. To access the belts, remove the faceplate, tilt the pulley back and support it.