How to correct Tajima error codes and solutions?
225 Travel outside the set embroidery area (When the software frame limit is set, or on cap machines). Solution: Move the frame manually so that the design fits in the embroidery area. 226 Absolute origin limit (+X, -Y) detected. Solution: Correct the frame limit position (s).
How to check the encoder signal on a Tajima?
Return the main shaft to the fixed position. Check the encoder signal Move up the needle bar by needle bar operation. Move the frame manually so that the design fits in the embroidery area. Move the frame back to the rear most end before moving the table up/down. Turn off power and wait 5 seconds. Turn on power again, if error 234
How to check for error 234 on Tajima?
Move the frame manually so that the design fits in the embroidery area. Move the frame back to the rear most end before moving the table up/down. Turn off power and wait 5 seconds. Turn on power again, if error 234 remains check the laser unit. Check chiller (cooling unit)
When to use 500 character code in Tajima?
_01 No 500 character function code when data set is set. Solution: Press RESET and set the data again. _02 Tajima tape complement error (The same +/– numerics are entered in a single stitch data) Solution: Correct the tape
What are the error codes for Tajima machine?
Tajima Machine Error List _01 No 500 character function code when data set is set. Solution: Press RESET and set the data again. _02 Tajima tape complement error (The same +/– numerics are entered in a single stitch data)
_01 No 500 character function code when data set is set. Solution: Press RESET and set the data again. _02 Tajima tape complement error (The same +/– numerics are entered in a single stitch data) Solution: Correct the tape
What to do if you get error code 311 on your Mac?
Keeping everything on your Mac updated will not only help the Mac run smoothly, but also lowers the possibility of getting unexpected error, including error code 311. To upgrade your system and apps to the latest version, first go to Apple menu and select App Store.
What is the error code for Tajima tape complement?
_02 Tajima tape complement error (The same +/– numerics are entered in a single stitch data) Solution: Correct the tape _03 Data is involved in the tape end code. Solution: Correct the tape _04 Improper function code position. Or, wrong tape format was selected.
