How much does it cost to replace a serpentine belt on a Mercedes?
The cost to replace a serpentine belt on a Mercedes-Benz could be as low as $25 or as high as $600 or more. It all depends on the cost of the belt and the labor involved, as well as other factors individual to the auto mechanic you choose. A serpentine belt itself will sell for as low as $25 or as much as $75.
When should I replace my serpentine belt?
How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.
What’s the best way to replace a serpentine belt?
Auto tensioners have either a hole that will fit a half inch drive ratchet, or a bolt you can use a socket to apply pressure to. Insert the wrench or place the socket over the bolt on the tensioner and twist it away from the belt to relieve the tension on it.
What was the price of a 2001 Bounder?
The Bounder line of recreational vehicles has continued to be a popular motorhome for campers and vacationing families. MOTORHOMES – 2001 prices include (2)color TV’s, VCR, (2)air conditioners, generator, back-up camera, microwave, DSS manual lift and awning.
What to do if your belt is loose after routing?
If the belt is loose after routing it, it is either the wrong size belt or you’ve routed it incorrectly. Apply pressure on the auto tensioner and put the belt over it. Use the same wrench to loosen the auto tensioner pulley, then pull the belt over it. Once the belt is in place, release the pressure on the tensioner so it holds the belt in place.
Where do I find the serpentine belt routing diagram?
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.
Auto tensioners have either a hole that will fit a half inch drive ratchet, or a bolt you can use a socket to apply pressure to. Insert the wrench or place the socket over the bolt on the tensioner and twist it away from the belt to relieve the tension on it.
If the belt is loose after routing it, it is either the wrong size belt or you’ve routed it incorrectly. Apply pressure on the auto tensioner and put the belt over it. Use the same wrench to loosen the auto tensioner pulley, then pull the belt over it. Once the belt is in place, release the pressure on the tensioner so it holds the belt in place.
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.
How is the tension set on a serpentine belt?
Depending on the application, your serpentine belt will either have tension placed on it using a movable bracket or an auto tensioner pulley. This pulley uses an internal spring to apply consistent pressure to the belt at all times. If your vehicle does not have a tensioner pulley, the alternator bracket is likely how tension is set on the belt.
