How does a manual hydraulic leveling system work?
For Manual, Automatic and Remote Leveling the vehicle engine must be running, the transmission in park and the parking brake set. Securely block the rear wheels using wheel chocks. Locate the “ON/OFF” button on the upper right of the control panel. Momentarily depress this switch to activate the leveling system.
How does the LCI level up touch panel work?
The LCI Level-Up® OneControl Touch Panel is an automatic leveling system control for fifth wheel applications. It interfaces to the LCI Level-Up® pump/jack system to level the trailer. The system utilizes one main control board and a separate waterproof remote level sensor to measure and manage level point, and can be operated from several
When to check power gear hydraulic leveling system?
The Power Gear PowerLevel hydraulic leveling system should be routinely checked as part of a regular vehicle maintenance program. Power Gear recommends checking the system twice a year: in the spring prior to the heavy travel season and in the winter, prior to storage. The following checklist has been provided as a guideline for maintenance. 1.
Do you have to use all leveling jacks?
The PowerLevel system performs the dual function of leveling the vehicle and, once a level plane has been achieved, stabilizing the vehicle. When leveling the vehicle, it may not be necessary to use all of the leveling jacks however, to stabilize the vehicle, all jacks should be extended to contact the ground. SITE SELECTION 1.
What should I do if my leveling jacks are not working?
Silicones and cleaning agents such as Dawn dish soap can worsen the corrosion and render your system irreparable. So what you should do is spray the system well with WD-40 and then wipe clean.
What kind of fluid do you use for leveling jacks?
Hello Joe, Typically Fleetwood used the Power Gear leveling system which is now owned by Lippert Components Inc (LCI). According to the Power Gear manual, they recommend the following: Type A automatic transmission fluid (ATF, Dexron III, etc.,)will work satisfactorily.
Are there hydraulic leveling jacks on my 2006 Seabreeze?
On our last trip, Dec 2018 with my 2006 National SeaBreeze LX 32′, the hydraulic leveling jacks deployed correctly, but upon leaving they retracted normally, but slow, and then the control panel displayed at least one of them was still down and would sound an alarm when I removed the parking brake.
What kind of grease to use on leveling jacks?
Mobil DTE 11M, Texaco Rando HDZ-15HVI, Kendall Hyden Glacial Blu, or any Mil. Spec. H5606 hydraulic fluids are recommended for cold weather operation. The grease fittings are generally designed to add a small amount of grease to disperse moisture in the cylinder so it should be good.
