How do you replace an AC condenser in a Ford Escape?

Any refrigerant that has not leaked out will need to be vacuumed out. Install an AC gauge set to measure the pressure. Inspect the condenser for leaks. If condenser is bad, remove all of the refrigerant. Remove and replace condenser. Evac and recharge the AC system. Leak check for any system leaks. Check for proper operation of the AC system.

What happens when you replace the AC condenser in a Subaru?

When the AC condenser is replaced, the compressor, orifice tubes, and receiver dryer often have to be replaced as well. Any refrigerant that has not leaked out will need to be vacuumed out.

Do you have to replace the condenser in your AC system?

Once they are bolted on and torqued to specifications you can move on to the next step. Inasmuch as you have opened the system to the atmosphere to replace the condenser, air containing moisture has been introduced. Therefore, the receiver/drier on your system MUST be replaced.

Do you have to replace the O-rings on an AC condenser?

The next step will be to replace the o-rings on the AC lines going to the condenser. Note: These o-rings can only be used one time and must be replaced or your system will leak. Coat the the o-rings with the system oil to ensure a good seal. Once the o-rings are replaced the lines can be bolted back to the condenser.

How do I recover refrigerant from an AC condenser?

Open the high and low side pressure valves on the machine and let the machine recover the refrigerant. The recovery process will be done once the gauges both drop to zero and the machine says the process is completed. Step 1: Removing items in the way. Remove parts that are in the way of the condenser. Consult the Factory Service Manual.