Do I need a breakaway cable on an unbraked trailer?
Unbraked Trailer Secondary Coupling Breakaway Cable – MP4987B. This tends to be fixed under one of the bolts that hold your unbraked coupling to the drawbar or a-frame of your trailer. This is a legal requirement on all unbraked trailers. This must NOT be fitted to a braked trailer.
What safety device must be fitted to a trailer?
breakaway cable
A breakaway cable is a safety device fitted to a trailer. When loading a trailer spread the load evenly. It is against the law to have a load that is sticking out in a dangerous way.
What is a breakaway cable?
If you’re new to caravanning then it’s important to know about breakaway cables – a steel cable that is designed to bring the trailer or caravan to a halt in the unlikely event the towed unit becomes unhitched.
What’s the best way to attach a breakaway cable?
There are two main ways to correctly attach the breakaway cable. Where a designated attachment point is provided on the towbar a) Pass the cable through the attachment point and clip it back on itself b) Attach the clip directly to the designated point – permitted by the trailer manufacturer.
Can you use breakaway cable and safety chain at the same time?
Finally, never use the same safety chain attachment item (S-hook, rapid link, etc.) to attach both your breakaway cable and safety chain to your tow vehicle. If the attachment item were to fail, you lose two safety backups (the chain and breakaway) at once.
Why does a breakaway switch not pull the pin?
While this keeps things nice and tidy, the extra friction of the cable being woven through the safety chain may prevent the cable from pulling the pin from the breakaway switch in an emergency.
How do you attach a cable to a towbar?
b) Attach the clip directly to the designated point – permitted by the trailer manufacturer. a) Fixed ball – loop the cable around the neck of the towball, use a single loop only. b) Detachable ball – we recommend you seek advice from the towbar manufacturer. In some instances it may be possible to attach the cable assembly to either:
There are two main ways to correctly attach the breakaway cable. Where a designated attachment point is provided on the towbar a) Pass the cable through the attachment point and clip it back on itself b) Attach the clip directly to the designated point – permitted by the trailer manufacturer.
Where do I hook the emergency break away wire on the hitch?
Where do I hook the emergency break away wire on the hitch. Thanks. There are many options for attaching the breakaway cable from the Tow Ready Trailer Break Away Kit, item # 50-85-315, to your vehicle. You could attach to a tie down point in the bed of your truck or you could use stake pocket tie down and attach the cable to it.
Finally, never use the same safety chain attachment item (S-hook, rapid link, etc.) to attach both your breakaway cable and safety chain to your tow vehicle. If the attachment item were to fail, you lose two safety backups (the chain and breakaway) at once.
While this keeps things nice and tidy, the extra friction of the cable being woven through the safety chain may prevent the cable from pulling the pin from the breakaway switch in an emergency.
